|
53 Device Attributes
|
|
Name
|
Inherited
|
Abstract
|
Attr. type
|
R/W type
|
Data type
|
Level
|
Description
|
| Online |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_SHORT |
OPERATOR |
Detector is Online (1) or Offline (0). |
| ConfigFile |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_STRING |
OPERATOR |
The name of the configuration file. |
| ParameterFile |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_STRING |
OPERATOR |
File containing the main detector parameters for the\nmeasurement. |
| SetupFile |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_STRING |
OPERATOR |
This is the root of the filename for the complete detector\nsetup (including configuration, trimbits, flat field\ncoefficients, badchannels etc.). The extension is\nautomatically generated. |
| CalibrationDir |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_STRING |
OPERATOR |
The path of the calibration files. |
| TrimDir |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_STRING |
OPERATOR |
The path of the trim files. |
| TrimEnergies |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_STRING |
OPERATOR |
The number of energies for which trimbit files exist\nand their value.\nString format: nen [e0 e1...en] |
| OutDir |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_STRING |
OPERATOR |
The directory to which the files will be written by default. |
| OutFileName |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_STRING |
OPERATOR |
The filename to which the files will be written by default\n(to which file and position indexes will eventually be\nattached). |
| OutFileIndex |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_LONG |
OPERATOR |
The start index of the output files (automatically\nincremented by the acquisition functions). |
| EnableMerge |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_BOOLEAN |
OPERATOR |
Set to 'true' to enable merging of frames to a single image. Otherwise\nthey will be kept in OutDir. |
| MinFrames |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_SHORT |
OPERATOR |
If less than MinFrames frames are acquired, they are not merged in a\nsingle image, but just moved to MergeDir. |
| MergeDir |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_STRING |
OPERATOR |
The directory to which the frames will be merged (or just moved). |
| MergeOngoing |
false |
false |
Scalar |
READ |
Tango::DEV_BOOLEAN |
OPERATOR |
This flag is 'true' when a merging is ongoing. |
| NMaxModules |
false |
false |
Scalar |
READ |
Tango::DEV_SHORT |
OPERATOR |
The maximum number of detector modules. |
| NModules |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_SHORT |
OPERATOR |
|
| Settings |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_STRING |
OPERATOR |
Detector settings. Can be:\n uninitialised\n standard\n fast\n highgain |
| Threshold |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_SHORT |
OPERATOR |
Detector threshold in eV.\nShould be half of the beam energy.\nIt is precise only if the detector is calibrated.\n |
| ExposureTime |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_FLOAT |
OPERATOR |
The exposure time per frame (in s). |
| FramePeriod |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_FLOAT |
OPERATOR |
The frame period (in s). |
| DelayAfterTrg |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_FLOAT |
OPERATOR |
The delay after trigger (in s). |
| GatesPerFrame |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_SHORT |
OPERATOR |
The number of gates per frame. |
| FramesPerCycle |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_LONG |
OPERATOR |
The number of frames per cycle (e.g. after each trigger). |
| NCycles |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_SHORT |
OPERATOR |
The number of cycles (e.g. number of triggers). |
| NProbes |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_SHORT |
OPERATOR |
The number of probes to accumulate (max 3). |
| DynamicRange |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_SHORT |
OPERATOR |
The dynamic range - can be 1, 4, 8,16 or 24 bits. |
| Flags |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_STRING |
OPERATOR |
Readout flags - can be none or storeinram. |
| Threaded |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_SHORT |
OPERATOR |
This tells whether the postprocessing and file writing of\nthe data is done in a separate thread (0 sequencial,\n1 threaded). Check that it is set to 1 if you acquire\nlong real time measurements and/or use the storeinram\noption otherwise you risk to lose your data. |
| TrimMode |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_STRING |
OPERATOR |
Trims the detector and writes the trimfile.\nMode can be:noise, beam, improve, fix, offline.\nCheck that the start conditions are OK!!! |
| TrimFile |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_STRING |
OPERATOR |
Name of trimfile (without extension .snxx).\nCheck that the start conditions are OK!!! |
| FlatFieldEnabled |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_BOOLEAN |
OPERATOR |
True when the flat field corrections are enabled. |
| FlatFieldFileName |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_STRING |
OPERATOR |
File containing the flat field corrections. |
| RateCorrEnabled |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_BOOLEAN |
OPERATOR |
True when the rate corrections are enabled. |
| RateCorrDefault |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_BOOLEAN |
OPERATOR |
True when using default rate corrections. |
| RateCorrDeadTime |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_FLOAT |
OPERATOR |
The dead time used for rate corrections. |
| BadChannelsEnabled |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_BOOLEAN |
OPERATOR |
True when the the bad channels corrections are enabled. |
| BadChannelsFileName |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_STRING |
OPERATOR |
File containing the definition of the bad channels. |
| AngConvEnabled |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_BOOLEAN |
OPERATOR |
True when the the angular conversion is enabled. |
| AngConvFileName |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_STRING |
OPERATOR |
File containing the definition of the angular conversion\ncoefficients. |
| GlobalOffset |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_FLOAT |
OPERATOR |
The fixed angular offset of your encoder -\nshould be almost constant! |
| FineOffset |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_FLOAT |
OPERATOR |
A possible angular offset of your setup -\nshould be small but can be senseful to modify. |
| BinSize |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_FLOAT |
OPERATOR |
The binning size of the angular conversion. |
| Positions |
false |
false |
Scalar |
READ_WRITE |
Tango::DEV_STRING |
OPERATOR |
The number of positions at which the detector is moved\nduring the acquisition and their values.\nString format: np [pos0 pos1...posnp] |
| ModuleSerialNumber |
false |
false |
Scalar |
READ |
Tango::DEV_STRING |
OPERATOR |
The module serial number(s). |
| ModuleFirmwareVersion |
false |
false |
Scalar |
READ |
Tango::DEV_LONG |
OPERATOR |
The module firmware version. |
| DetectorSerialNumber |
false |
false |
Scalar |
READ |
Tango::DEV_LONG |
OPERATOR |
The detector serial number (MAC address). |
| DetectorFirmwareVersion |
false |
false |
Scalar |
READ |
Tango::DEV_LONG |
OPERATOR |
The detector firmware version. |
| DetectorSoftwareVersion |
false |
false |
Scalar |
READ |
Tango::DEV_LONG |
OPERATOR |
The detector software version. |
| MythenSoftwareVersion |
false |
false |
Scalar |
READ |
Tango::DEV_LONG |
OPERATOR |
The mythen software version. |
| DigitalTestResult |
false |
false |
Scalar |
READ |
Tango::DEV_STRING |
OPERATOR |
Result of the Digital Test(s):\n0 test passed |
| BusTestResult |
false |
false |
Scalar |
READ |
Tango::DEV_STRING |
OPERATOR |
Result of the Bus Test:\n0 test passed\n |
| ExtSigResult |
false |
false |
Scalar |
READ |
Tango::DEV_STRING |
OPERATOR |
Result of the ExtSig Command.\n |
| Data |
false |
false |
Spectrum (30720) |
READ |
Tango::DEV_ULONG |
OPERATOR |
Last image data. |
